TTX-KUB-MICRO60V2-MIB-VER2 DEFINITIONS ::= BEGIN

IMPORTS
  mgmt, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks, internet, experimental
    FROM RFC1155-SMI
  TRAP-TYPE 
    FROM RFC-1215	
  OBJECT-TYPE 
    FROM RFC-1212;
   

--  MIB-II (same prefix as MIB-I)

mib-2      OBJECT IDENTIFIER ::= { mgmt 1 }

-- textual conventions

DisplayString ::= OCTET STRING
-- This data type is used to model textual information taken
-- from the NVT ASCII character set.  By convention, objects
-- with this syntax are declared as having SIZE (0..255)

PhysAddress ::= OCTET STRING
-- This data type is used to model media addresses.  For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.

-- groups in MIB-II

system       OBJECT IDENTIFIER ::= { mib-2 1 }

interfaces   OBJECT IDENTIFIER ::= { mib-2 2 }

at           OBJECT IDENTIFIER ::= { mib-2 3 }

ip           OBJECT IDENTIFIER ::= { mib-2 4 }

icmp         OBJECT IDENTIFIER ::= { mib-2 5 }

tcp          OBJECT IDENTIFIER ::= { mib-2 6 }

udp          OBJECT IDENTIFIER ::= { mib-2 7 }

egp          OBJECT IDENTIFIER ::= { mib-2 8 }

-- historical (some say hysterical)
-- cmot      OBJECT IDENTIFIER ::= { mib-2 9 }

transmission OBJECT IDENTIFIER ::= { mib-2 10 }

snmp         OBJECT IDENTIFIER ::= { mib-2 11 }

-- the System group

-- Implementation of the System group is mandatory for all
-- systems.  If an agent is not configured to have a value
-- for any of these variables, a string of length 0 is
-- returned.

sysDescr OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A textual description of the entity.  This value
            should include the full name and version
            identification of the system's hardware type,
            software operating-system, and networking
            software.  It is mandatory that this only contain
            printable ASCII characters."
    ::= { system 1 }

sysObjectID OBJECT-TYPE
    SYNTAX  OBJECT IDENTIFIER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The vendor's authoritative identification of the
            network management subsystem contained in the
            entity.  This value is allocated within the SMI
            enterprises subtree (1.3.6.1.4.1) and provides an
            easy and unambiguous means for determining `what
            kind of box' is being managed.  For example, if
            vendor `Flintstones, Inc.' was assigned the
            subtree 1.3.6.1.4.1.4242, it could assign the
            identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
            Router'."
    ::= { system 2 }

sysUpTime OBJECT-TYPE
    SYNTAX  TimeTicks
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The time (in hundredths of a second) since the
            network management portion of the system was last
            re-initialized."
    ::= { system 3 }

sysContact OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The textual identification of the contact person
            for this managed node, together with information
            on how to contact this person."
    ::= { system 4 }

sysName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "An administratively-assigned name for this
            managed node.  By convention, this is the node's
            fully-qualified domain name."
    ::= { system 5 }

sysLocation OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The physical location of this node (e.g.,
            `telephone closet, 3rd floor')."
    ::= { system 6 }

sysServices OBJECT-TYPE
    SYNTAX  INTEGER (0..127)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A value which indicates the set of services that
            this entity primarily offers.

            The value is a sum.  This sum initially takes the
            value zero, Then, for each layer, L, in the range
            1 through 7, that this node performs transactions
            for, 2 raised to (L - 1) is added to the sum.  For
            example, a node which performs primarily routing
            functions would have a value of 4 (2^(3-1)).  In
            contrast, a node which is a host offering
            application services would have a value of 72
            (2^(4-1) + 2^(7-1)).  Note that in the context of
            the Internet suite of protocols, values should be
            calculated accordingly:

                 layer  functionality
                     1  physical (e.g., repeaters)
                     2  datalink/subnetwork (e.g., bridges)
                     3  internet (e.g., IP gateways)
                     4  end-to-end  (e.g., IP hosts)
                     7  applications (e.g., mail relays)

            For systems including OSI protocols, layers 5 and
            6 may also be counted."
    ::= { system 7 }
 

-- Experimental 
 
ttxDevices OBJECT IDENTIFIER ::= { experimental 55 }

traps OBJECT-TYPE
    SYNTAX SEQUENCE OF TrapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Таблица трапов"
    ::= { ttxDevices 16 }        
    
trapEntry OBJECT-TYPE
    SYNTAX TrapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Информация о получателе трапов"
    INDEX { trapReceiverNumber }
     ::= { traps 1 }
     
TrapEntry ::=
    SEQUENCE {
        trapReceiverNumber
            INTEGER,
        trapEnabled
            INTEGER,
        trapReceiverIPAddress
            IpAddress,
        trapCommunity
            DisplayString
    }            
    
trapReceiverNumber  OBJECT-TYPE
    SYNTAX INTEGER (0)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Индекс приёмника трапов"
    ::= { trapEntry 1 }
    
trapEnabled OBJECT-TYPE
    SYNTAX INTEGER { Включено(1), Отключено(0) }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Указывает, включена ли отправка трапов"
    ::= { trapEntry 2 }


trapReceiverIPAddress OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS mandatory
    DESCRIPTION
        "IP адрес получателя трапов"
    ::= { trapEntry 3 }

trapCommunity OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..7))
    ACCESS  read-write
    STATUS mandatory
    DESCRIPTION
        "Community, который будет использован при отправке трапов"
    ::= { trapEntry 4 }


vmr OBJECT-TYPE
    SYNTAX SEQUENCE OF VmrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Таблица ВМР"
    ::= { ttxDevices 2 }

    
vmrEntry OBJECT-TYPE
    SYNTAX VmrEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Информация о состоянии ВМР"
    INDEX { vmrNumber }
     ::= { vmr 1 }
     
VmrEntry ::=
    SEQUENCE {
        vmrNumber
            INTEGER,
        vmrUnitId
            INTEGER,
        vmrTemperature1
            INTEGER,
        vmrRH
            INTEGER,
        vmrFaza1
            INTEGER,
        vmrFaza2
            INTEGER,
        vmrFaza3
            INTEGER,
        vmrCounter1
            Gauge,
        vmrCounter2
            Gauge,
        vmrCountReset
            INTEGER,
        vmrDoor
            INTEGER,
        vmrAlarm
            INTEGER,
        vmrKey
            DisplayString,
		vmrIAC1
			INTEGER,
		vmrIAC2
			INTEGER,
		vmrIAC3
			INTEGER,
		vmrU60	
			INTEGER,
		vmrIDC1	
			INTEGER,
		vmrIDC2	
			INTEGER,
		vmrT1	
			INTEGER,
		vmrT2	
			INTEGER,
		vmrT3	
			INTEGER,
		vmrT4	
			INTEGER,
		vmrT5	
			INTEGER,
		vmrT6	
			INTEGER,
		vmrT7	
			INTEGER,
		vmrT8	
			INTEGER,
		vmrU1	
			INTEGER,
		vmrU2	
			INTEGER,
		vmrU3	
			INTEGER,
		vmrU4	
			INTEGER,
		vmrU5	
			INTEGER,
		vmrU6	
			INTEGER,
		vmrU7	
			INTEGER,
		vmrU8	
			INTEGER,
		vmrMKACon	
			INTEGER,
		vmrMKAStatus	
			INTEGER,
		vmr8SKIN	
			INTEGER,
		vmrTemperature2	
				INTEGER,
        vmr8SKIN_1
            	INTEGER,
        vmr8SKIN_2
            	INTEGER,
        vmr8SKIN_3
            	INTEGER,
        vmr8SKIN_4
            	INTEGER,
        vmr8SKIN_5
            	INTEGER,
        vmr8SKIN_6
            	INTEGER,
        vmr8SKIN_7
            	INTEGER,
        vmr8SKIN_8
            	INTEGER	
    }            
    
vmrNumber  OBJECT-TYPE
    SYNTAX INTEGER (1..14)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Индекс таблицы ВМР"
    ::= { vmrEntry 1 }
    
vmrUnitId  OBJECT-TYPE
    SYNTAX INTEGER {ЭПУ485(1), ДВТ485(2), МСИ485(3), ИС485(4), 8СК485(5), ИС-Привратник(6), ИС-Микро(7), 4ОПС-Пожар(8), 4ОПС-Охрана(9), РТ485(10), ЭПУ485в2(11), ЭПУ485в2(12),ПСТ485(13), ДВТ485в2(18), АКБ485(19), АКБ485(20), АКБ485(21), МСИ-6Р(22)}
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Тип ВМР (UnitId)"
    ::= { vmrEntry 2 }

vmrTemperature1 OBJECT-TYPE
    SYNTAX INTEGER (-55..125)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура (ДВТ485,РТ485)"
    ::= { vmrEntry 3 }      

vmrRH OBJECT-TYPE
    SYNTAX INTEGER (0..100)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Влажность (ДВТ485)"
    ::= { vmrEntry 4 } 
  
vmrFaza1 OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение фазы 1 (ЭПУ485), В"
    ::= { vmrEntry 5 } 
 
vmrFaza2 OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение фазы 2 (ЭПУ485), В"
    ::= { vmrEntry 6 } 
    
vmrFaza3 OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение фазы 3 (ЭПУ485), В"
    ::= { vmrEntry 7 }
    
vmrCounter1 OBJECT-TYPE
    SYNTAX Gauge (0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Счетчик (ЭПУ485, МСИ485)"
    ::= { vmrEntry 8 }
    
vmrCounter2 OBJECT-TYPE
    SYNTAX Gauge (0..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Счетчик (МСИ485)"
    ::= { vmrEntry 9 }

vmrCountReset OBJECT-TYPE
    SYNTAX INTEGER (0..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Количество рестартов"
    ::= { vmrEntry 10 }

vmrDoor OBJECT-TYPE
    SYNTAX INTEGER {закрыто(0),открыто(1)}
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Дверь (ИС485)"
    ::= { vmrEntry 11 }

vmrAlarm OBJECT-TYPE
    SYNTAX INTEGER {На охране(0), Проникновение\ошибка снятия(1), Ошибка постановки(2), Снят с охраны(3))}
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Охрана (ИС485)"
    ::= { vmrEntry 12 }

vmrKey OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Код ключа"
    ::= { vmrEntry 13 }
	
vmrIAC1 OBJECT-TYPE
    SYNTAX INTEGER (0..200)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Переменный ток 1 (ЭПУ485в2), А*10"
    ::= { vmrEntry 14 }	
	
vmrIAC2 OBJECT-TYPE
    SYNTAX INTEGER (0..200)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Переменный ток 2 (ЭПУ485в2), А*10"
    ::= { vmrEntry 15 }	
	
vmrIAC3 OBJECT-TYPE
    SYNTAX INTEGER (0..200)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Переменный ток 3 (ЭПУ485в2), А*10"
    ::= { vmrEntry 16 }
	
vmrU60 OBJECT-TYPE
    SYNTAX INTEGER (0..750)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 60В (ЭПУ485в2), В*10"
    ::= { vmrEntry 17 }
		
vmrIDC1 OBJECT-TYPE
    SYNTAX INTEGER (-500..500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Постоянный ток 1 (ЭПУ485в2), А*10"
    ::= { vmrEntry 18 }
		
vmrIDC2 OBJECT-TYPE
    SYNTAX INTEGER (-500..500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Постоянный ток 2 (ЭПУ485в2), А*10"
    ::= { vmrEntry 19}
		
vmrT1 OBJECT-TYPE
    SYNTAX INTEGER (-63..63)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура 1 (АКБ485 + МКА6/12), °C "
    ::= { vmrEntry 20}
		
vmrT2 OBJECT-TYPE
    SYNTAX INTEGER (-63..63)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура 2 (АКБ485 + МКА6/12), °C "
    ::= { vmrEntry 21}
		
vmrT3 OBJECT-TYPE
    SYNTAX INTEGER (-63..63)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура 3 (АКБ485 + МКА6/12), °C "
    ::= { vmrEntry 22}
		
vmrT4 OBJECT-TYPE
    SYNTAX INTEGER (-63..63)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура 4 (АКБ485 + МКА6/12), °C "
    ::= { vmrEntry 23}
		
vmrT5 OBJECT-TYPE
    SYNTAX INTEGER (-63..63)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура 5 (АКБ485 + МКА6/12), °C "
    ::= { vmrEntry 24}
		
vmrT6 OBJECT-TYPE
    SYNTAX INTEGER (-63..63)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура 6 (АКБ485 + МКА6/12), °C "
    ::= { vmrEntry 25}
		
vmrT7 OBJECT-TYPE
    SYNTAX INTEGER (-63..63)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура 7 (АКБ485 + МКА6/12), °C "
    ::= { vmrEntry 26}
		
vmrT8 OBJECT-TYPE
    SYNTAX INTEGER (-63..63)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура 8 (АКБ485 + МКА6/12), °C "
    ::= { vmrEntry 27}
		
vmrU1 OBJECT-TYPE
    SYNTAX INTEGER (0..1500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 1 (АКБ485 + МКА6/12), В*100 "
    ::= { vmrEntry 28}
		
vmrU2 OBJECT-TYPE
    SYNTAX INTEGER (0..1500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 2 (АКБ485 + МКА6/12), В*100 "
    ::= { vmrEntry 29}
		
vmrU3 OBJECT-TYPE
    SYNTAX INTEGER (0..1500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 3 (АКБ485 + МКА6/12), В*100 "
    ::= { vmrEntry 30}
		
vmrU4 OBJECT-TYPE
    SYNTAX INTEGER (0..1500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 4 (АКБ485 + МКА6/12), В*100 "
    ::= { vmrEntry 31}
		
vmrU5 OBJECT-TYPE
    SYNTAX INTEGER (0..1500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 5 (АКБ485 + МКА6/12), В*100 "
    ::= { vmrEntry 32}
		
vmrU6 OBJECT-TYPE
    SYNTAX INTEGER (0..1500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 6 (АКБ485 + МКА6/12), В*100 "
    ::= { vmrEntry 33}
		
vmrU7 OBJECT-TYPE
    SYNTAX INTEGER (0..1500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 7 (АКБ485 + МКА6/12), В*100 "
    ::= { vmrEntry 34}
		
vmrU8 OBJECT-TYPE
    SYNTAX INTEGER (0..1500)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Напряжение 8 (АКБ485 + МКА6/12), В*100 "
    ::= { vmrEntry 35}
		
vmrMKACon OBJECT-TYPE
    SYNTAX INTEGER (-127..128)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Подключенные каналы МКА(АКБ485), 8-ми битовое представление, каждому биту соответствует один канал, младший бит - канал №1, 0 - канал отключен, 1 - канал подключен "
    ::= { vmrEntry 36}
		
vmrMKAStatus OBJECT-TYPE
    SYNTAX INTEGER (-32768..32767)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Связь с МКА(АКБ485), 16-ти битовое представление, каждым двум битам соответствует один канал, младшие два бита - канал №1, 00 - связи нет, 01 - связь есть"
    ::= { vmrEntry 37}
	
vmr8SKIN OBJECT-TYPE
    SYNTAX INTEGER (-32768..32767)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Входы 8СК, 16-ти битовое представление, каждым двум битам соответствует один вход, младшие два бита - вход №1, 00 - замыкание, 10 - норма, 11 - обрыв "
    ::= { vmrEntry 38}

vmrTemperature2 OBJECT-TYPE
    SYNTAX INTEGER (-55..125)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Температура (ДВТ485,РТ485)"
    ::= { vmrEntry 39} 
	
vmr8SKIN_1 OBJECT-TYPE
    SYNTAX INTEGER (-128..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Вход 8СК №1, 00 - замыкание, 10 - норма, 11 - обрыв"
    ::= { vmrEntry 40}

vmr8SKIN_2 OBJECT-TYPE
    SYNTAX INTEGER (-128..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Вход 8СК №2, 00 - замыкание, 10 - норма, 11 - обрыв"
    ::= { vmrEntry 41}

vmr8SKIN_3 OBJECT-TYPE
    SYNTAX INTEGER (-128..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Вход 8СК №3, 00 - замыкание, 10 - норма, 11 - обрыв"
    ::= { vmrEntry 42}

vmr8SKIN_4 OBJECT-TYPE
    SYNTAX INTEGER (-128..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Вход 8СК №4, 00 - замыкание, 10 - норма, 11 - обрыв"
    ::= { vmrEntry 43}

vmr8SKIN_5 OBJECT-TYPE
    SYNTAX INTEGER (-128..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Вход 8СК №5, 00 - замыкание, 10 - норма, 11 - обрыв"
    ::= { vmrEntry 44}

vmr8SKIN_6 OBJECT-TYPE
    SYNTAX INTEGER (-128..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Вход 8СК №6, 00 - замыкание, 10 - норма, 11 - обрыв"
    ::= { vmrEntry 45}

vmr8SKIN_7 OBJECT-TYPE
    SYNTAX INTEGER (-128..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Вход 8СК №7, 00 - замыкание, 10 - норма, 11 - обрыв"
    ::= { vmrEntry 46}

vmr8SKIN_8 OBJECT-TYPE
    SYNTAX INTEGER (-128..127)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Вход 8СК №8, 00 - замыкание, 10 - норма, 11 - обрыв"
    ::= { vmrEntry 47}

vmrNET_FREQ OBJECT-TYPE
    SYNTAX INTEGER (0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Частота сети в десятых Гц"
    ::= { vmrEntry 48}
	
-- KUB

kub OBJECT IDENTIFIER ::= { ttxDevices 1 }

-- Температура КУБ
kubTemp OBJECT-TYPE
  SYNTAX  INTEGER (-550..1250)
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Температура КУБ, °C*10"
  ::= { kub 1 }

-- Напряжение питания КУБ 
kubUpit OBJECT-TYPE
  SYNTAX  INTEGER (0..750)
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Напряжение питания, V*10"
  ::= { kub 2 } 

-- Вход 1
kubIn1 OBJECT-TYPE
  SYNTAX  INTEGER {замкнут(0), разомкнут(1)}
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Вход 1 КУБ, 0-замкнут, 1-разомкнут"
  ::= { kub 3 }

-- Вход 2 
kubIn2 OBJECT-TYPE
  SYNTAX  INTEGER {замкнут(0), разомкнут(1)}
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Вход 2 КУБ, 0-замкнут, 1-разомкнут"
  ::= { kub 4 }

-- Вход 3
kubIn3 OBJECT-TYPE
  SYNTAX  INTEGER {замкнут(0), разомкнут(1)}
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Вход 3, 0-замкнут, 1-разомкнут"
  ::= { kub 5 }

-- Вход 4
kubIn4 OBJECT-TYPE
  SYNTAX  INTEGER {замкнут(0), разомкнут(1)}
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Вход 4, 0-замкнут, 1-разомкнут"
  ::= { kub 6 }

-- Вход "Фаза"
kubPhase OBJECT-TYPE
  SYNTAX  INTEGER {норма(0), авария(1)}
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Вход Фаза, 0-норма, 1-авария"
  ::= { kub 7 }
  
-- Пожарный шлейф
kubFire OBJECT-TYPE
  SYNTAX  INTEGER {Норма(0), Пожар(1), Обрыв(2), Короткое замыкание(3)}
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Пожарный шлейф: 0 - норма, 1 - Пожар, 2 - Обрыв, 3 - КЗ "
  ::= { kub 8 }  
  
-- Вибрация
kubVibr OBJECT-TYPE
  SYNTAX  INTEGER {норма(0), авария(1)}
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Вибрация: 0 - норма, 1 - авария"
  ::= { kub 9 }  

-- Счетчик КУБ
kubImpCnt OBJECT-TYPE
  SYNTAX  Gauge (0..4294967295)
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Вход Счетчик КУБ, имп."
  ::= { kub 10 }

-- Счетчик рестартов КУБ
kubRstCnt OBJECT-TYPE
  SYNTAX  Counter (0..127)
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "Счетчик рестартов, кол-во рестартов"
  ::= { kub 11 }

--MAC адрес КУБ
kub_MAC_Address OBJECT-TYPE
  SYNTAX  DisplayString(0..255)
  ACCESS  read-only
  STATUS  mandatory
  DESCRIPTION
    "MAC адресс контроллера, V*10"
  ::= { kub 12 } 
  
-- ************* ТРАПЫ КУБ ********************

trapKubTemp TRAP-TYPE
  ENTERPRISE kub
  VARIABLES { kubTemp }
  DESCRIPTION 
    "Превышение порога температуры"
  ::= 1


trapKubIn1 TRAP-TYPE
  ENTERPRISE kub
  VARIABLES { kubIn1 }
  DESCRIPTION 
    "Изменение состояния входа 1"
  ::= 2

trapKubIn2 TRAP-TYPE
  ENTERPRISE kub
  VARIABLES { kubIn2 }
  DESCRIPTION 
    "Изменение состояния входа 2"
  ::= 3

trapKubIn3 TRAP-TYPE
  ENTERPRISE kub
  VARIABLES { kubIn3 }
  DESCRIPTION 
    "Изменение состояния входа 3"
  ::= 4

trapKubIn4 TRAP-TYPE
  ENTERPRISE kub
  VARIABLES { kubIn4 }
  DESCRIPTION 
    "Изменение состояния входа 4"
  ::= 5

trapKubPhase TRAP-TYPE
  ENTERPRISE kub
  VARIABLES { kubPhase }
  DESCRIPTION 
    "Изменение состояния входа Фаза"
  ::= 6

trapKubFire TRAP-TYPE
  ENTERPRISE kub
  VARIABLES { kubFire }
  DESCRIPTION 
    "Изменение состояния пожарного шлейфа"
  ::= 7

trapKubVibr TRAP-TYPE
  ENTERPRISE kub
  VARIABLES { kubVibr }
  DESCRIPTION 
    "Изменение состояния входа Вибрация"
  ::= 8


END